Prince Hydraulic Hand Pump PM-HP-10B
$1,125.00 Auto Selected
10 in stock
- Stock/Inventory Verified. All Parts Are Carried In House.
- QUESTIONS? Call 319-656-3434
- We Do Not Dropship
Description
Upgrade your hydraulic system with this durable and efficient hydraulic pump, featuring a robust 11/16” chromed and ground steel piston for maximum performance. Designed for reliability, it includes O-ring and Hytrel backup washer pressure seals, ensuring leak-free operation under high pressure. The extra heavy 14 3/4” handle offers enhanced leverage, with a selective two-position option for versatile usage.
The pump has unique design features which insure versatility. The handle can be used in (2) positions. The pump can be mounted vertically and horizontally. There are (3) different volume and pressure settings.
Position 1: 1.25 cu. in. per stroke-1500 psi*
Position 2: .95 cu. in. per stroke-2000 psi*
Position 3: .60 cu. in. per stroke-3000 psi*
*At applied force of 60-65 lbs. on handle. (Pressure to 6,000 psi can be developed with more force)
This hydraulic pump is built for convenience and durability, with a steel tubing reservoir that can be mounted either horizontally or vertically. The four-bolt mounting system (3/8” bolts) adds to the stability, and a built-in float check prevents oil from sloshing. Additionally, the dipstick allows easy monitoring of the oil level, and the handle carrier ensures that the handle remains securely in place when not in use.
Perfect for industrial and heavy-duty applications, this pump provides both reliability and ease of maintenance.
- 11/16″ Chromed and Ground steel piston
- O-Ring and Hytrel backup washer pressure seals
- Extra heavy 14 3/4″ long handle
- Selective two position handle
- Steel tubing reservoir
- Four bolt mounting for 3/8″ bolts
- Horizontal or vertical mounting
- Float check to prevent oil from sloshing out
- Dipstick to check oil level
- Handle Carrier to prevent losing handle
Additional information
| Weight | 35 lbs |
|---|---|
| Dimensions | 19 × 7.5 × 7.9 in |
Question
Scott Frey –
PM-HP-10B PUMP NOT PUMPING FLUID OR DEVELOP PRESSURE. TANK IS FULL OF FLUID. RELEASE VALVE IS IN THE FULLY CW POSITION (THREADED IN)
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Slabach Enterprises –
Mr. Frey,
I apologize for the issue you are experiencing with the hand pump. After looking over your comment, I believe the underlining issue has to do with the pump needing to be primed in order to function properly. Attached is a link to our pump removal and installation procedure. In your case, there is no need to follow the entire procedure, only steps 3 thru 6 will apply. Once you perform the priming function, this should allow the pump to begin working correctly. If you continue to experience issues, please feel free to contact our office for further assistance.
– George (Manufacturing Director)
🔗 https://slabachstore.com/wp-content/uploads/2023/03/Hydraulic-Hand-Pump-Removal-Installation.pdf
📞319-656-3434
📧 [email protected]
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tom –
I have the release valve closed and the slides are down. When I pump the handle the slides move up but as I raise the handle to pump again the slides go back down. No amount of pumping will raise the slides.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Slabach Enterprises –
Hi Tom, after reviewing your issue we believe the pump needs to be primed. I’ve attached the link to our installation instructions to help (Step 4) https://slabachstore.com/wp-content/uploads/2023/03/Hydraulic-Hand-Pump-Removal-Installation.pdf If you continue to run into issues call us 📞319-656-3434
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal